CCS Fireman's outfit

Protective Clothing For Fire Fighting

• Type: DXPC-1
  Standard:
  SOLAS 1974, MSC.36(63), MSC.97(73), MSC.98(73), EN 469 (2020) .
  Performance & Requirement：
  Water proof: Hydraulic pressure ≥4000 Pa
  Heat radiation resistance: Under the heat radiation with 10kw/㎡
  the increase of tempeature on inner-surface not over 25℃,
  after irradiated for 30 seconds.
  Material: Aramid fiber
  Protection class: limit the fire spreading (outer material): pass
  Limit the fire spreading (inner material): pass
  Thermal conductivity (radiant heat): I class
  Thermal conductivity (thermal convection): I class
  Thermal contact: I class

Fire-Fighting Rubber Boots

The boots weigh about 2.2 kg. Made of fire-retardant rubber, non-slip, anti-static, fireproof, waterproof, oil-resistant, anti smashing and anti puncture. There is a thin steel plate embedded in the bottom of the boots. It has good protection for ankle and feet. The interior of the sole is a lining of sterilized canvas and lined with a sponge bottom. The above products are all in line with national standards and can be used in conjunction with fireman's insulation clothing and chemical protective clothing.

More & Tech Datas

Fire Fighter’s Gloves

• Cow-nappa leather

• Lining with cut resistant insulation material (100% Para-aramide)

• Eurotex membrane

• Elastic tightening at the wrist

• Kevlar thread

More & Tech Datas

Fire Fighting Helmet

• Components: Helmets, wearing devices, masks, shawls

• Impact absorption performance: <3457.6N

• Combustion resistance: After the fire source leaves the cap, the flame of the cap is extinguished within 5s, and there is no obvious burning sign inside the cap.

• Mask: No obvious deformation or damage after heat resistance test.

• Fire helmet material: ABS reinforced plastic, shawl with a comprehensive waterproof flame retardant fabric.

• Features: impact resistance, penetration resistance, flame resistance, adjustable wearable device.

• Function: Its performance indicators fully meet the requirements of GA44-1997 Fire Helmet Standard.

Handheld Explosion-Proof Light

• ZDL-102 aluminum alloy material is used for die casting and coated with high-quality paint.

• There is no through hole in the light housing, and the reed switch and the structure of the strong magnetic switch are used to ensure the explosion-proof performance.

• The light has a safety locking screw to ensure that the light is not open in flammable and explosive places.It can only be used in a safe place by a special wrench to turn off the light cover when the power is turned off (the spare hex wrench should be kept by someone).

• Using a DC power supply, battery 1 * 6 section.

• Set photovoltaic beads: 7.2V 0.5A.

• Set the illumination: 130LX lamps 10 meters away.

• The use of ambient temperature -25℃~ +40℃, the relative temperature of the environment ≤ 90%.

More & Tech Datas

Fireman Axe

• Material: carbon steel

• Hardness: between 48-52HRC

• Weight: 2.8kg

• Size: 250*835mm

• Advantages: sturdy and durable, easy to carry

Self-contained Breathing Apparatus

DX-marine self-contained breathing apparatus (SCBA) is widely used in fire control, chemical, ship, oil, smelting, electric power, warehouse, laboratory, mine and other key departments for fire fighting, fire, gas, steam, and oxygen. It is a safe and effective for fire extinguishing and rescue. An ideal personal breathing protection device.

More & Tech Datas

Fireproof lifeline

• Length : 40m 

• Diameter : 12mm 

• Weight: 3.3kg 

• Breaking load : 5 kN 

• Material : The inner core of  Ф4.2mm aviation steel wire rope, outsourcing double braided twine, elastic hook is made of stainless steel.

More & Tech Datas

Safety Belt

• Weight: 0.5kg

• Bearing weight : 887.8 kg

• Length : 115.5 cm    

• Width :  7.5 cm  

• Features: wear resistance, flame retardancy, working pull 4500N

• Material : nylon ribbon and metal components.

More & Tech Datas

Purchase instructions

1.The site currently supports about 10 currencies, please choose the currency you want to pay.

2.For ease of purchase, buyers need only provide receipt information and email. The system will automatically send you an email notification as part of the buyer's purchase voucher.

3. If you need us to design plans for major projects such as shipbuilding, marine engineering, water restaurants, submarine entertainment, sea surfing, etc., please send a direct email to tech@dx-marine.com.

4.In order to prevent you from buying fake and inferior products, please buy it directly from our official website or call the agent and dealer.

5.On logistics: Chinese buyers acquiesced in Shentong and Yuantong. Other regions may need to ship from Hong Kong or Shanghai.